|
|
GT
|
Kadett
|
Opel GT & Kadett Frame Measurements
|
A
|
72"
|
71 1/2"
|
From centerline of lower ball joint stud to centerline of front lower arm bushing.
|
B
|
25 1/4"
|
25 1/4"
|
Outside of left frame horn to outside of right frame horn.
|
C
|
22 3/4"
|
22 3/4"
|
Centerline of front cross member right attaching bolt holes to centerline of front cross member left attaching bolt holes.
|
D
|
48 1/16"
|
48 1/16"
|
From centerline of hole in radiator support to right front frame horn reinforcement to centerline of left front underbody drain hole.
|
E
|
48 1/16"
|
48 1/16"
|
From centerline of hole in radiator support to left front frame horn reinforcement to centerline of right front underbody drain hole.
|
F
|
49 7/8"
|
49 7/8"
|
From rear outside edge of right front frame rail to rear outside edge of left front frame rail.
|
G
|
59 1/8"
|
59 1/8"
|
From centerline of lower ball joint stud to centerline of second side drain hole.
|
H
|
35 3/4"
|
35 3/4"
|
Centerline of right lower control arm to centerline of left lower control arm.
|
I
|
32"
|
32"
|
Centerline of second side underbody drain hole to centerline of rear spring seat.
|
J
|
36 1/8"
|
36 1/8"
|
Centerline of right spring seat to centerline of left spring seat.
|
K
|
23 3/8"
|
41 3/8"
|
Centerline of spring seat to bumper bracket bolt hole on outside of lower tail panel.
|
L
|
37 7/8"
|
37 7/8"
|
Outside edge of right rear frame rail to outside edge of left rear frame rail.
|
M
|
15 7/8"
|
15 7/8"
|
Centerline of radiator support bolt hole to centerline of front cross member front attaching bolt hole.
|
N
|
12 1/4"
|
12 1/4"
|
Lower edge of front frame horn to Datum line.
|
O
|
10 3/4"
|
10 3/4"
|
Frame rail mating surface for front cross member to Datum line.
|
P
|
6"
|
6"
|
Front portion of underbody to Datum line.
|
Q
|
6"
|
6"
|
Rear portion of underbody to Datum line.
|
R
|
13 3/4"
|
13 3/4"
|
Center of spring seal to Datum line.
|
S
|
14 3/4"
|
14 3/4"
|
Centerline of rear bumper bracket to lower tail panel bolt to Datum line.
|
